EMKA 1000 program ¼ turn to IP65 and IP54 for applications
ranging across steel/GRP/plastics/multi-layer enclosures, cabinets,
lockers, machine guards, access panels, covers, roadside cabinets, etc

EMKA's 1000 series of ¼ turn insert locks has been a core locking system for electrical/electronic enclosures and cabinets in Europe for some 40 years, and is often regarded as a major advance in design, typified by their common housing section, so enabling rapid installation via single hole fixing, using a standard "EMKA 20mm" square cut-out. EMKA are pleased to announce that this series now consolidates many long term technical developments and a large number of variant types such that it is now probably the most comprehensive modular locking system available to specialist panel builders. The 1000 series offers protection levels against dust and water of IP65 and IP54 for applications ranging across steel/GRP/plastic/multi-layer enclosures, cabinets, lockers, machine guards, access panels, covers, roadside cabinets, industrial desking, workstations and secure waste containers.

The 1000 ¼ turn series features a substantial range of different lock inserts including: triangle, square, double bit, and key type. Key lockable options include barrel locks, wing handles, T & L handles as well as a Key captive version. Tamper and vibration proof specifications are met by an unusual "safety" variant with a number of insert options. Special inserts may be provided throughout the range to suit custom requirements with standard housings in a variety of lengths to suit material thicknesses or door depths. Many locks permit padlock operation and there are also a number for high-security applications or to suit specific key requirements, e.g. special automotive and railway applications where ASSA and KABA standards are specified. An exceptional selection of standard cams is a significant feature of this program - which combined with various housing lengths can offer standard configurations to suit applications up to 92mm long. Additionally special cams are possible as are custom designs to customer specification.

Ongoing development over 40 years has ensured that these simple ¼ turn locks are suited to many situations - with finishes to suit outdoor or hazardous environments, e.g. stainless-steel for salt spray, polyamide for wet environments and for wash down areas. In addition all key barrels have front plates in stainless-steel and are shuttered to reduce ingress of dust and water.

While originally introduced to offer a single point locking solution, multi-point locking has also been introduced in the 1000 program to enable 2-point or 3-point closure using heavy-duty latches and cam operated rods. Other recent developments include powder coating in custom colours and the addition of customer logos on certain housings.

For further information on Emka's 100 series ¼ turn insert locks, e-mail: emka@emka.co.uk or view website: www.emka.co.uk

A range of specialist Locks and Handles designed
especially for electrical cabinets, 19" racks, roadside cabinets,
wall boxes, cabinet suites, Motor Control Centres and related applications

The 1225 Series from EMKA is a range of specialist Locks and Handles designed especially for electrical cabinets, 19" racks, roadside cabinets, wall boxes, cabinet suites, Motor Control Centres and related applications. They offer extremely simple fitment with screw-in assembly, IP65 protection or alternatively quick hook-in fixing, giving IP54. Customer logos can be presented on all escutcheons.

1225 program units can be non-locking or locking with various key combinations, including EMKA keys and other generic key lock types. The range covers swing handle options with a variety of locking solutions, some with fixed barrels, profile cylinders, padlock variants or special security options, such as KABA and ASSA. Different types of lock inserts may be selected from an extensive list, e.g. double-bit, square, triangular, also profile cylinder options include standard key, inserts, push button release, radial pin and radial pin push.

The whole 1225 series has polyurethane (PUR) injected foam gaskets on escutcheons for optimal sealing and performance up to IP65. An important feature of the EMKA program in general is its modular interchangeability of components - the 1225 program exemplifies this in the flexibility of its configuration, where single, double, 3 and 5-point closure is possible. This is achieved with a standard 3-point cam and round rod system, giving single, double and 3-point options with shoot bolt rods, straight rods, roller ends (for smoother compression) and special variants to suit unusual applications. This is further extended by EMKA's standard multi-point flat rod system which greatly adds to customer choice options with various catching methodologies to complement different gasket compression requirements, e.g. twisted rods, roller rods, hooked rods and leading edge slides.

Flat rod systems may also be fitted inside or outside the gasketed sealing area (which maximises the useable door area) and they have the ability to lock around 90º corners - providing up to 5-point locking on doors from 800mm up to 2200mm high. Further information on EMKA products and services may be found at: www.emka.co.uk, where it is also possible to download any part or the entire EMKA product catalogue.

For further information on the 1225 series of specialist locks and handles from EMKA, e-mail: emka@emka.co.uk or view website: www.emka.co.uk   Refer to page 79

Telescopic stay with push button release offers the benefits
of stainless steel in rugged corrosion prone environments

Market leaders EMKA, long known for their slogan "Everything but the Enclosure", have been steadily adding to their offering of locks and hinges in stainless steel. Now they offer one of the most popular cabinet accessories in stainless steel - the humble door stay. This time the 1097 telescopic stay with push button release offers the benefits of stainless steel in rugged corrosion prone environments.

The 1097, like its "milder" family may be used for support of horizontal or vertical covers and doors on control panels, e.g. rooftop air-conditioning cabinets, for support, or simply as a wind stay.

Standard features of the 1097 (stainless steel) series include manual release in 382mm extended length. Manual release ensures an added level of safety - requiring somebody to physically push the release button for release and is especially applicable in outdoor windy conditions.

The 1097 telescopic stay with push button release.

All 1097 type telescopic cover stays are adjustable for opening angle, dependent upon the mounting configuration. Two position release systems are also offered. Further information on EMKA products and services may be found at: www.emka.co.uk, where it is also possible to download any part or the entire EMKA product catalogue.

For further information, e-mail: emka@emka.co.uk or view website: www.emka.co.uk   Refer to page 86

Smedegaard has set a new standard in quiet pumping technology

Smedegaard has set a new standard in quiet pumping technology with the release of its new WallPress WHISPER™ range of pressurisation sets.

The WallPress WHISPER™ does exactly what it describes - as it's whisper-quiet in operation, delivering a noise level which is unmatched by any other competitor model. Each wall-mounted WHISPER™ - is designed for use with Smedegaard Expansion vessels and suitable for LTHW and chilled water systems - is designed to provide a minimum system pressure requirement and comes complete with a digital microprocessor Control Module as standard, delivering system diagnostics, high and low pressure monitoring and volt-free contact for boiler/chiller interlock.

The launch range of WallPress units is comprised of three different quality compact, wall-mounted models. The WHISPER™ SINGLE offers the lightest, most compact solution at H460xD220xW300, powered by a 20 watt motor and delivering a maximum cold fill pressure of up to 4 bar. The WallPress MONO is also of single pump operation, fitted with a 0.6kW motor and available in 3 and 6 bar versions, and the range is completed by the WHISPER™ DUO - the same usefully compact size as the MONO at H510xD220xW440, but offering the benefits of twin pump capability.

As per all Smedegaard pumping systems, the WallPress WHISPER™ range is designed to the highest possible quality standards and is of robust construction. With features such as a unique pump over-ride facility and control module error logging, the WallPress range offers maximum functionality at exceptional value for money.

The WallPress WHISPER™ range is available now from your local Smedegaard sales agent.

For further information, e-mail: whisper@smedegaard.co.uk.