New TechnoMod Gantry Machine,
a multi-axis motion platform complete
with controls, cabling, software, and enclosure

Techno Inc. Linear Motion Systems now offer its New TechnoMod Gantry Machine, a multi-axis motion platform complete with controls, cabling, software, and enclosure; all fully assembled. The TechnoMod is available in three different sizes and can be used for pick and place, dispensing, assembly, testing, drilling, routing, welding and general automation applications.

Joe Griffin, Techno Linear Motion Sales Manager, states, "The New TechnoMod machine is completely assembled when it arrives. All electronics are wired, and software installed, allowing customers the ease of running the machine in any work cell shortly. The only setup customers may have to perform is the mounting of drill, dispenser, laser or automation tooling required for their application, and in many cases Techno can do this for the customer prior to shipping."
 
Travel ranges are 650 x 300 x 275 mm for the Model 30, 650 x 450 x 275 mm for the Model 45 and 650 x 650 x 275 mm for the Model 65. Additionally, a 4th or 5th rotary axis can be added to the machine for more complex operations, while all drive motors are DC brushless servos providing high torque and precision. The TechnoMod can be delivered with or without electronics as well as a sliding front door with safety interlock. It has a built-in industrial computer and rugged swing arm console which includes a monitor and keyboard. 
 
For further information, and to see the CAD Drawings and catalogue specifications on the New TechnoMod Gantry, view website: http://www.techno-isel.com/tic/Catdas/TechnoModGantry.htm, or call to speak with an Application Engineer, Tel: 1-800-819-3366.  Refer to page 90

Molex's expanded XRC line of extra rugged sealed
circular connectors are ideal for heavy-duty applications

Molex Incorporated (NASDAQ: MOLX and MOLXA) now offer a new addition to its line of sealed circular connectors. XRC™ (Extra Rugged Circular) sealed plugs and receptacles are now available in an 18-shell/14-circuit size and 24-shell/31-circuit size. The circular connectors are ideal for heavy-duty applications such as construction equipment, marine, recreational vehicles, transportation and agricultural markets.

In addition, the 24-shell size, 31-circuit connectors have a wire seal imprinted, instead of embossed or engraved, making it easier to see and identify each circuit for faster installation and field servicing. A backshell is also available for use with the 24-shell size products. The backshells easily snap onto the XRC housing after terminal assembly for increased strain relief.

Designed to meet IP67 standards, the Molex XRC plugs and receptacles are protected against the ingress of dust, water and other contaminants to maintain the integrity of the mated pair. Plugs feature a quick-disconnect bayonet latch to provide quick and easy connections with reduced installation and service time while ensuring accurate mating depth.

"We added to the XRC line to meet our customers' needs and address the needs of the industrial market," said Molex product manager Bill Mahony. "We enhanced the rugged, sealed circular line to add even more design flexibility while still offering an economical solution."

The XRC connector features a grommet retainer with a lip for compatibility with backshell and over-moulded applications. A large polarizing key indicator aids in visual alignment to facilitate easier mating. The simple crimp-and-poke technology does not require terminal alignment when installing crimped wires, while enlarged imprinting on the wire seals clearly identifies each circuit, making installation and field servicing fast.

For further information, view website: www.molex.com/link/xrc.html  Refer to page 75

igubal high tensile rod end bearings from igus

Plastic bearing expert igus has extended the range of its dimensional series E igubal rod end bearings with the introduction of the EBRM-16 V. By inserting a steel reinforcement into its igubal rod end bearing, igus has increased the tensile load capability by up to 50% when compared to its pure plastic versions.

"With this option, igus is closing the gap between steel and plastic parts in terms of load capacity," says Matthew Aldridge of igus UK. "Able to handle tensile loads up to 15kN, designers can replace steel rod end bearings with corrosion resistant and maintenance-free igubal alternatives - clearly a more cost-effective option."

Typical examples of where igubal high tensile rod ends can be used include link arms and barriers used outside, particularly in solar power systems and facades, as well as pneumatic cylinders and drive mechanisms.

Refer the to picture above: Modern plastic with steel insert instead of steel: the new igubal rod end bearing takes tensile loads up to 15kN - cheaper alternative to stainless steel components and maintenance-free too.

Igs in profile
Based in Northampton in the UK, and with global headquarters in Cologne, Germany, igus is the largest producer of injection moulded polymer bearings and reinforced plastic cable carriers in the world. Product lines include industry-leading E-Chain cable carriers, Chainflex continuous-flex cables, iglidur plastic plain bearings, igubal spherical bearings, DryLin linear bearings and guide systems. The company has 26 subsidiaries across 31 countries and employs approximately 1,800 people worldwide.

With plastic bearing experience since 1964, cable carrier experience since 1971 and continuous-flex cable since 1989, igus provides the right solution based on 80,000 products available from stock with between 1,500 and 2,500 new products introduction each year.

For further information, view website: www.igus.co.uk   Refer to page 92

Hangar Power Distribution Cubicles (PDC) provides
the benchmark for individual circuit protection for RAF

FDB Electrical, pioneers in power distribution/control are pleased to announce their FDB27 range of Hangar Power Distribution Cubicles (PDC) which has proved to be the benchmark for individual circuit protection in RAF Bases around the world. Designed in accordance with MOD and PSA specifications, the FDB27 range provides electrical protection and control for power supplies to ground support equipment in hangars, workshops and garages.

Each FDB27 unit features push button control RCD protection and ECM Earth continuity monitoring c/w shortened pilot pin sockets and plugs allowing disconnection of supply before the plug main contacts break. Voltages available are 220/240V, 380/415V @ 50/60Hz and with ratings of 16A, 32A, 63A and 125A with standard 30mA RCD. Output is by means of a fitted socket outlet to EN 60309-1 (TB03/05) complete with dedicated pilot contact, but special versions are available for supplies to emergency vehicles and to hazardous areas.

For emergency use, all units in the FDB27 range containing Earth Continuity Monitors are provided with diode polarity selectors and changeover switches to facilitate immediate power supply to portable equipment with incorrectly connected or missing diode protection.

As well as the standard combined RCD/ECM type, other versions can be supplied with choice of RCD or ECM protection only - the latter being recommended for essential supplies to radar cabins etc. The special FDB27 "Malvern" type is also available for Optronics buildings or direct supplies to technical vehicles with high levels of inherent earth leakage current due to power line filters.

For further information, e-mail: gary.miles@fdb.uk.com or view website: www.fdb.uk.com   Refer to page 109

IDEAL's unique combination of Digital Circuit Breaker
Finder, Non-Contact Voltage Tester and Socket Tester

IDEAL INDUSTRIES (U.K.) LTD. Recently launched a new Digital Circuit Breaker Finder and Socket Tester designed to safely and easily locate breakers and identify common wiring faults.

The Digital Circuit Breaker Finder makes locating AC circuits quicker and easier than ever before. With the dependable second-pass indication, you can be confident that you are locating the correct circuit breaker or fuse supplying power to an AC socket or *lighting fixture without having to interrupt the circuit. The Digital Circuit Breaker Finder also features a non-contact voltage sensor mode, that senses when a voltage higher than 50V is present, beeping audibly to alert the user.

The integrated Socket Tester instantly identifies common wiring faults by verifying the wiring configuration. Wiring errors are indicated by one or more LEDs failing to light, with the pattern of lit LEDs indicating the type of fault. This failsafe socket tester system means that any LED that is not lit indicates a problem.

Tony Kumeta, European General Manager at IDEAL INDUSTRIES (U.K.) comments: "The unique combination of a Digital Circuit Breaker Finder, Non-Contact Voltage Tester and a Socket Tester in one, gives residential and commercial electricians a versatile and easy-to-use tool for troubleshooting electrical circuits saving them valuable time and money."

The Digital Circuit Breaker Finder also features auto-power off and low battery detection. The Digital Circuit Breaker Finder and Socket Tester kit includes power cord, manual and soft carrying case. 

For further information, view website: www.idealindustries.co.uk or e-mail: Ideal_UK@idealindustries.com