Key locking wing T and L handles in AISI 316 grade stainless steel

Specialist panel builders seem to love the modular EMKA product range so we expect their new key locking stainless steel handles will also be well received. These wing, T and L handles in AISI 316 grade stainless come at a high specification for material and sealing at IP65. Standard EMKA modular cylinders and keys complete the package for use in all sorts of arduous, wash-down, corrosive or otherwise very difficult environments.

EMKA M.D. Andy Billingham voiced the view that "these new stainless steel handles confirm our commitment to the UK's access control needs - whatever the situation. We have had a good range of keyless products for many years - now we can meet the requirement for keyed variants and fully expect additional stainless products to come through in the near future. This is another exciting development for us in responding to customer needs."

1000 series stainless handles in wing, T and L formats feature standard EK 333 key types and EMKA standard 20mm "rounded square" cut-out installation. They accept the extensive range of modular EMKA cams which allow for different depths of doors and frames in combination.

For further information, e-mail: emka@emka.co.uk or view website: www.emka.co.uk where it is possible to download  the EMKA product catalogue.   See page 74

A comprehensive range of stainless steel locks, hinges and handles

Enclosure hardware specialists FDB Panel Fittings are pleased to announce a comprehensive range of stainless steel locks, hinges and handles suited to petrochemical plants, hospitals, food processing establishments, medical environments, outdoor installations, marine and offshore industries.

The range includes piano hinges, integral recessed lock/handles, weld-on hinges, bolt-on hinges, grab handles, spanner locks, rod locks, concealed hinges, lever and T handles. Importantly for marine/offshore installation many are available in stainless grade 316 as well as the more common 303 and 304 with satin and electro polished finishes.

Stainless steel panel fittings are suited for control cabinets, electrical equipment and instrument housings, especially where exposed to the elements or frequent wash down processes.

This stainless range is designed to complement the standard range of die-cast and mid steel fittings and in many cases is interchangeable with them.

For further information, e-mail: info@fdb.co.uk or view website: www.fdb.co.uk   Refer to page 63

Stainless steel miter gears from QTC
are stocked in 10 sizes in modules 1~3

Precision 20° pressure angle stainless steel miter gears from Quality Transmission Components (QTC) are stocked in 10 sizes in modules 1~3 in both 20 and 25 tooth. These gears, identified as the SUM Series, are made of SUS303 and conform to precision grade JIS B 1704 grade 3 standards. They are stocked in sizes ranging from Module 1 to Module 3. Bore sizes range from 6 mm to 20 mm and hub diameters from 16 mm to 65 mm.

In addition to these stainless steel miter gears, QTC stocks a wide variety of miter gears in other materials including: steel, plastic, injection molded, sintered metal, and in specialized types including: carburized & hardened, angular, finished bore, and spiral miter gear types.
 
At the new QTC eStore you can get immediate quotes, download 3D models, and place online orders. Go to: http://www.qtcgears.com/RFQ/default2.asp. Other power transmission solutions provided by QTC include over 9,000 off-the-shelf timing belt pulleys, belts, belt and roller chain tensioners and other components for prototypes and production applications.
 
Complete technical specifications are contained in catalog Q420, which is available to users of metric gears free upon request from Quality Transmission Components (QTC), Division of Designatronics, Inc., 125 Railroad Avenue, Garden City Park, NY 11040-5016. Tel: 516-437-6700, Fax: 516-328-3343, Website: http://www.qtcgears.com/QTCPress/SSMiterGears.htm   Refer to page 96

The Technifor range of pneumatic micro-percussion marking machines

With marking fields of 100 x 80 mm and 200 x 80 mm respectively, the XF510Sp and XF510Dp models further enrich the Technifor range of pneumatic micro-percussion marking machines. They are the fastest in the world in their category, and they can mark up to 10 characters per second, twice as many as the previous generations. They are compact and they feature multiple communications interfaces, which makes them even easier to integrate. The XF510Sp and the XF510Dp provide ideal solutions for precision marking applications in series production: mechanical engineering, motor vehicle manufacture, metalworking, pneumatic components, electronic components, sensors, etc.

From the design stage on, the marking speed was the main priority set for the XF510Sp and XF510Dp models. Firstly, latest generation electronic components were selected to reduce calculation times. Secondly, the marking head shuttle trajectory was optimised. Lastly, a new motor control system was installed. New micromechanical components were also integrated. The XF510Sp and XF510Dp marking machines can mark up to 10 characters per second, and they execute a DataMatrixTM code in under 5 seconds.

The XF510Sp and XF510Dp machines are easy to use. Their UC500 remote control unit is designed for use all over the world. Its interface currently features 20 languages; it handles 14 types of keyboard, and it is powered by a universally compatible system for supplies ranging from 90 to 250 V. A production line designed in one country can thus be exported anywhere in the world without any modifications. The control software is also very user friendly; it is based on pictograms, and it provides mult ple marking possibilities: fixed texts, variable texts (dates, counters, teams, variables, etc.), logos, or DataMatrixTM codes, with flat, angular, radiating markings, etc.

Lastly, the XF510Sp and XF510Dp marking machines are particularly wide-ranging. They feature boards with 8 inputs and 4 outputs as standard, and RS232, USB and Ethernet ports. They can be controlled via Ethernet or RS232 links as required (exchanges of information concerning marking start, cycle end, cycle stop, machine ready for marking, marking in progress, etc.). The USB port is used mainly for backups, software updates, transferring marking files, logos and fonts, saving marking files, and so on. (Refer to pictures on the right).

For further information, e-mail: beauregard@gravograph.co.uk

New Techno Rotary Table RF replaces
many CAM driven Tables at half the price

Techno, Inc. Linear Motion Systems' Rotary Table RF, is a variable speed, infinite positioning rotary table that can be used in various industrial applications. Offered with optional accessories, magnetic brake, 3-Jaw Chuck and 490 mm diameter flat disk, the new RF provides customers the opportunity to complete their application without going to multiple vendors. The Rotary Table RF is available with stepper or servomotor and several different ratios, thus providing high-speed or high-torque options. (Refer to picture on the right).

Techno Linear Motion Sales Manager Joe Griffin exclaims "The New Rotary Table RF can be used in place of CAM driven tables with more versatility at half the price." The Rotary Table RF can take loads up to 170 lbs. It has a footprint of 410 x 275 mm and a height of 122 mm (stepper option) and 200 mm (servomotor option). Additionally, it can be mounted horizontally or vertically. This low backlash, rotary table is compact and sturdy, set in a rigid cast aluminum body.

Each Rotary Table RF is complete with a hardened, ground and flat milled steel rotary surface. Maximum output torque is 188 Nm and is available in 24:1, 52:1, and 100:1 ratios. Customers can choose between high-speed or high-torque options, based upon their application requirements. Techno's Rotary Table RF is recommended for use in pick and place, assembly, testing, inspection and dispensing applications.
 
For further information, view CAD Drawings and catalogue specifications on the new Rotary Table RF, view website: http://www.techno-isel.com/Tic/Catdas/rotaryRF htm or speak with an Application Engineer, Tel: 1-800-819-3366.